AOM3 Builders

General Contractor

  • Home
  • About Us
  • Projects
    • Religious Facility Projects
    • Residential Projects
    • School Projects
    • Hospital Projects
    • Non-residential Projects
    • Commercial Projects
    • Government Projects
    • Industrial Projects
  • Services
    • Scaffolding Rentals
    • Plumbing Services
  • Blog
  • Contact Us
You are here: Home / Archives for Blog

Basic Tips on Your Plumbing

December 7, 2017 By brodneil Leave a Comment

You can call a plumber to repair this, or you can attempt to do your own plumbing. We hope that this will serve well to anyone who wishes to do their own plumbing.

Avoid household cleaners in your toilet

Be careful when putting household cleaners in your toilet. They can cause the toilet to breakdown. The debris that these cleaners leave can sit in your toilet’s pipelines and harden, making them practically impossible to get rid of. If it does solidify, it normally requires the aid of an expert.

Clean your faucet’s aerator or tap aerator

faucet

It is very important to clean your faucet’s aerator or tap aerator from time to time. Not cleaning it can cause lime accumulation, which in turn, might trigger water leakages or low water pressure. To clean an aerator, you can unscrew it from the faucet, dip a brush into vinegar, and use the brush to clean it.

Look for a reliable plumber or plumbing service

Find a plumbing technician or plumbing service provider that you can rely on. Make certain to obtain recommendations from family and friends so that you can avoid getting duped, which takes place frequently. Make sure not to pay the plumber prior to the work is completed. It is fine to pay a downpayment to the plumber; not the whole completion amount.

Remove sediments on your water heater

Eliminate all sediment buildup around your water heater.  Cleaning your water heater can increase its longevity so that you do not face pipes problems. This precaution will save effort, time, and cash.

Close the valves when going for an out-of-town vacation or trip

valve

Turn off your main water valve before leaving for an out-of-town vacation or getaway.  Shut off the individual valves for the toilets, sinks, and washer machine.  Check this before hand so you can fix valves which do not look like they are in good working order.

Summary

In conclusion, plumbing is bound to fail over time. There are two solutions: call a plumbing professional to fix it or attempt to fix it yourself. Getting the job done by yourself can sometimes be hard, however learning a new skill can be fun and fulfilling.

 

Filed Under: Blog Tagged With: Plumbing

Common Plumbing Ideas Which Are Not Utilize by the Common

November 28, 2017 By brodneil Leave a Comment

Are you looking for a plumber in your area? Or perhaps looking for some plumbing ideas to help you with on a task or while going for a vacation.

Plumbing tool
By: Internet Archive Book Images

Closing the Water Supply and Preparing a Handful of Pails

If you are attempting to repair the pipes yourself, be prepared to have a good number of pails on hand to avoid spilling water.  Though shutting the water supply usually suffices, there are times when some water is left in the pipes.  The bigger the home, the more substantial the plumbing system;  and therefore the more water stored along the pipes.  It is always good to prepare.

Check Your Plumbing Before Leaving for Vacation

Always remember to examine the plumbing outside of your home prior to going for a vacation.  Any leak that can bring havoc to your home and restful vacation.  Make sure that the faucets and pipeline, including your sprinkler system are not leaking.

Lead-free Solder

Rigid copper is utilized for primary water lines in many homes. Constantly utilize lead-free or nearly lead-free solder when doing a copper joint.

Inform Everyone at Home Where the Main Water Valve Is Located

Make certain that everybody in your home knows where to find and turn off the primary water valve in case pipes bursting. This is specifically essential if you live in a location where your pipes might freeze. Take a minute to show your family where the valve is and how to correctly shut it off.

Research First on Your Plumbing Project

Before beginning any plumbing project on your own, make sure to do a great deal of research. There are many resources offered to assist you in understanding your plumbing system.  This avoids many common errors made by do-it-yourself amateurs.

Learn from Your Professional Plumber

Once in a while, you may have hired a plumber.  Learn from him as he works.  Ask some questions. If your plumber is generous, you’ll have a great deal of new practical knowledge.

Your Toilet Is Not a Trashcan

Toilet for the waste and cotton swabs for the trashcan.  Make sure that whatever you put in the toilet can easily liquify, so that you do not cause major clogging in your pipelines and drains pipes.

 

I hope that this can serve as a friendly reminder. If not, feel free to email me and ask a question.

When you are in need of a Cebu plumber, we might be able to help you.

Filed Under: Blog Tagged With: Plumbing

Set up Scaffoldings in Less than 5 Minutes

July 25, 2016 By brodneil Leave a Comment

Having a system makes work more efficient; and this holds true for all types of construction work.

We know for a fact that we spend more time setting up our scaffoldings during the initial phase of a task or project. More time setting up scaffoldings, means less time on doing the actual work of the project/job.

Check out this video on how they set up their scaffoldings in less than 5 minutes.

Filed Under: Blog

Amazing Scaffolding that Can Save You Time and Money

July 18, 2016 By brodneil 2 Comments

Save time and money on masonry cost by using the right type of scaffolding for the job.

Normally, frames make you stop working about 3 times on a 14-foot wall. That is probably around 10 blocks per mason lost whenever they stop. And that is 30 blocks for 3 stops. Let us say you have 4 masons working, that is 1about 20 blocks per day lost.  Are you willing to throw away that much time and money simply because of scaffolding adjustments?  How about if there is a way to speed up work or  lessen the stops?  I’m sure as a project owner or manager, that you would be pleased to use it.

Non-Stop WORKHORSE scaffolding is jacked up in 1-3/4 inch increments with a jack handle that is moved from tower to tower. The long stroke on the handle gives you plenty of leverage to jack the platform when loaded with materials. To lower the scaffolding, simply raise the holding dog and “click” it down 1-3/4 inches at a time. The holding dog is a foolproof escapement mechanism. In addition, there is an inertial safety catch on the carriage.

Check out the video and the image to see non-stop WORKHORSE in action:

non stop scaffolding
OLYMPUS DIGITAL CAMERA

Source: nonstopscaffolding.com

Filed Under: Blog

What a Scaffolding Is and Its Types

July 17, 2016 By brodneil 3 Comments

What is a scaffolding?

A Scaffolding, also called a scaffold or a staging, is a temporary structure to aid in the construction, maintenance, and repair of buildings, bridges, and infrastructure.  Scaffoldings are also used in adapted forms  for concert stages, viewing towers, exhibition stands, ramps, art projects, and grandstand seating.

 

Types of Commonly Used Scaffoldings

 

H-frame Scaffolding / Facade Modular System Scaffolds

h-frame scaffolding or mason's scaffolding
Image Source: img.tradeindia.com

H-frames are one of the most common forms of scaffoldings. These are also called us mason’s scaffoldings or double scaffoldings.  They are normally used by almost all works in the construction industry: carpenters for ceiling installations, electricians for lighting installations, mason for plastering walls, painters for wall and ceiling jobs, and crew for the signage installations.  Heard of Non-stop Workhorse? it is an amazing innovation of the scaffolding particularly on masonry scaffoldings that can save you a lot of time and money. To rent an H-fram scaffolding in Cebu,  contact us.

 

Tube and Coupler (fitting) components also known as Steel or Tubular Scaffolding

1421057484image4
Image Source: grandhome.com.sg

Tube and clamp scaffold (commonly called tube and coupler scaffold) is a versatile type of scaffold consisting of steel tubes and clamps. The vertical tubes are connected to the horizontal tubes using right angle clamps. Diagonal tubes are also connected to the scaffold using swivel clamps to add stability to the structure.  Tube and clamp is among the most labor-intensive of all scaffolding applications, and is therefore generally used only when high capacity, unlimited adaptability, and versatility are needed.

 

 Needle Scaffolding or Cantilever Scaffolding

30bb92b4bddae0a1dc69a696e92c12b6
Source: http://www.business.govt.nz

 

Suspended Scaffolding

English: Window Cleaners on Wedge Internationa...
English: Window Cleaners on Wedge International Tower in Houston Category:Images of Houston, Texas (Photo credit: Wikipedia)

 

Trestle Scaffolding

?a=77733
Image Source: https://quickally.com.au

Each type of scaffolding has several components which usually include the following:

  • the plate or base jack
  • the upright or standard component of the scaffolding with connector joins,
  • the horizontal brace or ledger,
  • the transom which is the horizontal cross section,
  • the brace which is diagonal or the cross section bracing component,
  • the batten or board decking component used to make the working platform,
  • the coupler or fitting to join components together,
  • the scaffold tie hold the scaffold to the structure or building, and
  • brackets which are used to extend the width of working platforms.

Reference: https://en.wikipedia.org/wiki/Scaffolding

 

Filed Under: Blog

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • Next Page »

Like and Share

Copyright © 2026 · AOM3 Builders
General Contractor · Cebu Philippines